Prorider

//Prorider

Prorider

195,00

Model suitable for advanced skimers who want a board with excellent performances.

  • *Models & Density

    In this model we use polyvinil AIREX® C70 where you can choose from three densities (55Kg, 75Kg and 90Kg) and the higher density used the board becomes more rigid and resistant but also more expensive.

    *Sizes & Shape

    Custom Option: If you want a custom board in terms of size and different from those suggested by Folha choose this option and please contact us for clarification. This option also has no additional costs.

    *Thickness

    The thickness "shaped" makes the board slightly thinner either at the tail or nose. If you want the board with other thickness choose this option and contact us for further clarification. This option has no additional costs.

    *Finish

    Textured: The boards with this finish are rough allowing good adhesion to the feets therefore the board not requiring the usual wax or decks. It is the most suitable option for the beginner and intermediate models. However if you want to put a deck just sand the area and after clean with alcohol or acetone before placing it. 

    Textured Special +10€: It's identical to the Textured (Normal) finish but the entire board is sanded to get smoother getting also slightly brighter because we use an acrylic varnish. It is therefore more easier to put a deck if you want. It is the the most suitable option for the advanced models.

    *Logo

    *Top Options

    Normal: The board is manufactured with one of the colors or one of the mixtedcolors we have available.

    With Design Top +15€: The board is manufactured with one of the Design Tops we have available.

    With Art +20€: The board is manufactured with one of the Art we have available.

    Note: In any of the options "Mixtedcolors", "Design Top" or "Art" you can change the colors to your liking by simply mention those changes in the observation box when you place your order. If you have any questions please contact us.

    *Bottom Options

    Standard: The board is manufactured with one of the standards looks we have available.

    Color +10€: The board is manufactured with one of the colors we have available, that are the same as the ones for the top of the board.

    With Design Bottom +15€: The board is manufactured with one of Design Bottom we have available.

    Note: In the "Design Bottom" option you can change the colors to your liking just by indicating so in the comments section when placing your order. Please contact us if you have any doubt.

    *Stringer Blank

    Placing a stringer as have surfboards for added strength and rigidity without increasing the weight. A unique innovation of our brand: + 30€

    *Special Rails

    More perfect and more reinforced rails with more fiberglass and resin: +20€

    *Option Extra

    Extra Fiberglass +10€: Reinforcing with fiberglass E-Glass making the board more resistant but slightly harder.

    S-Glass +30€: The board is made with S-Glass fiberglass that is approximately 30% stronger than the normal E-Glass fiberglass.

    Central Carbon +15€: Strip with 20cm carbon fiber placed at the bottom of board for strength and rigidity without increasing its weight.

    Carbon Top (Normal)* +35€: The board is manufactured with standard E-glass fiberglass and one layer of carbon fiber on the top. The board will always be the color of carbon fiber on the top, which option is identical to black color, and you can choose any of the options available for the bottom (Standard, Color or With Design).

    Carbon Top (Color)* +45€: The board is manufactured with standard E-glass fiberglass and one layer of carbon fiber on the top but and you can choose any of the options available for the top (Normal, With Design or With Art) and also any of the options available for the bottom (Standard, Color or With Design). This option makes the board stronger but slightly heavier than the "Carbon Top (Normal)".

    Carbon Bottom* +25€: The board is manufactured with standard E-glass fiberglass and one layer of carbon fiber on the bottom and you can choose any of the options available for the top (Normal, With Design or With Art) and also any of the options available for the bottom (Standard, Color or With Design).

    Double Carbon (Normal)* +60€: The board is manufactured with standard E-glass fiberglass and two layers of carbon fiber one on the top and one on the bottom. The board will always be the color of carbon fiber over, which option is identical to black color, and you can choose any of the options available for the bottom (Standard, Color or With Design).

    Double Carbon (Color)* +75€: The board is manufactured with standard E-glass fiberglass and two layers of carbon fiber one on the top and one on the bottom and you can choose any of the options available for the top (Normal, With Design or With Art) and also any of the options available for the bottom (Standard, Color or With Design). This option makes the board stronger but slightly heavier than the "Double Carbon (Normal)".

    S-Glass (Bottom) & Normal Carbon (Top) +45€: The board is made with S-Glass fiberglass on the bottom and one layer of carbon fiber on the top. The board will always be the color of carbon fiber over, which option is identical to black color, and you can choose any of the options available for the bottom (Standard, Color or With Design).

    S-Glass (Bottom) & Color Carbon (Top) +60€: The board is made with S-Glass fiberglass on the bottom and one layer of carbon fiber on the top but you can choose any of the options available for the top (Normal, With Design or With Art) and also any of the options available for the bottom (Standard, Color or With Design). This option makes the board stronger but slightly heavier than the "S-Glass (Bottom) & Normal Carbon (Top)".

    (*) The boards made of carbon fiber are much more rigid and resistant than those made with other types of fiberglass and for this reason one of the additional options preferred by many advanced skimers who dislike flexible boards.

Category:

Description

Model suitable for advanced skimers who want a board with excellent performances.There are 3 versions available where the only difference is in the density and hardness of the foam polyvinyl AIREX that is used in manufacturing these versions. It also has various technical options and extras available that are very important to most athletes at this level. It has great handling on any type of sea and due to its line of curvature progressively developed by our brand will achieve waves far from the beach more easily and then surfing them with greater fluidity, speed and control.

Materials:
Polyvinil Airex C70 with 55Kg, 75Kg or 90Kg density.
Model manufactured with polyester resin, fiberglass, E-Glass, S-Glass or carbon fiber

Info Materials:

http://www.3accorematerials.com/products/airex/airexreg-c70.html

Board Weight: 1,7 Kg – 2,3 Kg

Note: If you want this model in CORK version, contact us

click on the photo to see large

Unlike other brands that use in this range of boards low-quality foam, FOLHA SKIMBOARDS manufactures all its models in this range of boards in structural foam (Foam Core) polyvinyl with excellent quality of the famous swiss brand AIREX.

Note: If you want to put a name on the board, please indicate this in your order or contact us.